Product Description

Digital Thickness Gauge Portable Ultrasonic Thickness Gauge for Metal 

Product Description  

 

UM series ultrasonic thickness gauge is extremely suitable for measuring the pipes about their thickness lose after corrosion.

Each instrument has been calibrated by 34 standard test blocks before delivery to ensure the accuracy of the measurement.

Optional USB Port or Serial RS232 Port.

Main Comparison Between Different Models

Model	UM-1	UM-1D	UM-2	UM-2D
Operating Principle	Pulse-Echo	Pulse-Echo Echo-Echo	Pulse-Echo	Pulse-Echo Echo-Echo
Measuring Range in Standard Mode	0.8mm-300mm(Depend on material and probe)	0.8mm-300mm(Depend on material and probe)	0.8mm-300mm(Depend on material and probe)	0.8mm-300mm(Depend on material and probe)
Measuring Range in Thru Coating Mode	×	3mm-20mm	×	3mm-20mm
Measuring Resolution	0.1mm, 0.001inch	0.1mm, 0.001inch	0.01mm, 0.0001inch	0.01mm, 0.0001inch
Probe Compensating Line	1 built-in probe compensating line	1 built-in probe compensating line	7 built-in probe compensating line	7 built-in probe compensating line
Data Logger	√	√	√	√

Product Specification

Display Type	128×64 dot-matrix LCD screen with EL backlight
Operating Principle	P-E (pulse-echo) with dual-crystal probes
Measuring Range	0.8mm-300mm, depend on material and probe
Measuring Limits of Tube(Steel)	Φ20mm  × 3.0mm (PT-08 probe) Φ15mm  × 2.0mm (PT-06 probe) The measuring error is up to ± 0.1mm
Measuring Error	Low limit to 10mm: ±0.1mm 10mm to high limit: ± ± (1%H+0.1) mm Note: H is the actual thickness of the testing material
Repeatability	0.1mm
Display Resolution	0.1mm, 0.001inch
Units	Inch or Millimeter
Calibration Method	Zero calibration, Two-point calibration
V-Path Correction	Automatic
Update Rate	4Hz
Material Velocity Range	1000~9999m/s (0.0394 to 0.3937in/μs)
Memory Function	5 arrays are divided to store 500 thickness values
Minimum Value Checking	Move the probe along the surface of the testing material, the gauge is able find the thinnest point automatically.
Warning Function	If the measured value exceeds the pre-set thickness limit, the warning tone will start.
Velocity Storage	Velocities of 5 different materials can be stored totally
Languages	English and Chinese
Communication Port	USB port or Serial RS 232 port (Optional)
Application Software	UmView Software for transmission,storage,analysis and documents editing (Optional)
Power Requirements	Two 1.5V AA alkaline batteries (Warning with low battery voltage)
Operating Time	Up to 200 hours with alkaline batteries (without backlight)
Instrument Shut-off	AUTO OFF after 5 minutes of inactivity
Operating Temperature	-10 °C to +50 °C , -20 °C in special requirements
Size	149mm X 73mm X 32mm(H X W X D)
Weight	210g including batteries

Optional Accessories

High-temperature probe	Castiron Probe	Small Tube Probe	Fingertip Probe	Proble Cable
Step Calibration Block	Application Software	Data Transmission Cable	Rubber Sheath	Couplant and High-temperature Couplant

Other Optional Probes

 Standard Congfiguration 

Name	Quantity
Main Unit	1
Probe	1
Battery	2
Couplant	1
Carrying Case	1
Operating Manual	1
Software	1 (Optional)

Appliaction  

About Us 

Shenyang Yushi Xianfeng Inspeciton Instrument Co; LTD. was founded in 1985, it is a professional enterprise specialized in developing, manufacturing Non-destructive Testing Instruments.
Our Factory Director Mr. Wang paticipates the research and development personally, who has already acquired many patents as well. We produce 7 sorts of products, which are Ultrasonic Thickness Gauge, Coating Thickness Gauge, Black-white Densitometer, Leeb Hardness Tester, LED Industrial Film Viewer, Ultrasonic Flaw Detector and X-ray Flaw Detector.

FAQ 

Q:What’s your after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.

Q:Do you accept OEM orders?
A: Yes, we provide OEM services to worldwide customers.

Q:What’s the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Q:How long is the lead time?
A: The lead time for single order is 1-3 days, for bulk orders is 3-10 days.

Q:How to place orders?
A: 1. Email us the model and quantity, consignee information, shipping way and payment terms; 
2. Proforma Invoice made and sent to you; 
3. Complete Payment after confirming the PI; 
4. Confirm Payment and arrange production.

Contact Us 

Payment Terms︰ CNF

Product Image